Kontrola spôsobilosti procesu

EdgeVend Capability Check

Process capability and tool-life validation from real measurement data

Paste a real measurement series, define the tolerance limits and get a conservative decision: increase, hold, reduce or stabilize first. No data is stored or sent to a server.

Measurement input

Paste values from Excel, CMM or inspection notes

Paste one column, rows or semicolon-separated values. Decimal point and decimal comma are accepted.

Measurement series A

Use the actual measurement order. Order matters for drift, EWMA and CUSUM.

Specification

Lower specification limit

Upper specification limit

Unit

Enable tool-life reserve Adds current part count and drift-based conservative reserve. This is not a sensor forecast. Compare two scenarios Use a second measurement series for A/B validation without storing data. Show advanced parameters Edit target value, measurement uncertainty and stability sensitivity if needed.

Target value

Optional. If blank, the midpoint between LSL and USL is used.

Measurement resolution

Optional. Used as a lightweight measurement-system risk and guard-band check.

Expanded uncertainty (optional)

Use only if you already know the measurement uncertainty of this measuring setup. Otherwise leave blank.

Stability sensitivity

Choose how sensitive the EWMA and CUSUM stability check should be. Balanced works for most screening cases.

Exclude detected outliers Advanced. Recalculate without detected IQR/z-score outliers and mark the result as an adjusted screening view.

Shop-floor decision

Result, warning and next step

The app shows what the result means, what to watch out for and what to do next.