EdgeVend bearbetningsrådgivare

Validera uppställningen före första skäret.

Set the process, tool, machine and sensitivities, then let the advisor reduce the job to a setup verdict, the main limiting factor and the first operating move.

Tekniskt dossier Fräsning mode Balanserad target Grundläggande view Scenariejämförelse av
Setup fingerprint –
Uppdrag A

Vad försöker du göra?

Define the process, target and working mode first. This sets the advisor lens before any numbers are judged.

Uppdrag B

Vilket verktyg använder du?

Capture geometry and cutting basics first, so load, chip thickness and cycle time are judged in the right context.

Uppdrag C

Vilken maskin och uppställning använder du?

Tell the advisor what spindle, material, coolant capacity and setup quality it should respect before it asks for more output.

Uppdrag D

Vad är känsligt här?

Use this block for the things that usually break real jobs: tolerance, depth, hole type, coolant, lubrication, runout and interruption.

Uppdrag E

Tänk-om-scenario

Model a safer, faster or more aggressive variant and let the decision rail explain the trade-off.

Uppställningsbedömning

Keep the call, the limiting factor and the first operating move visible while the setup changes.

Direkt omberäkning Öppna scenariejämförelse
Setup verdict

–

–

Machine context –
Scenario compare –
Setup verdict –
Konfidens –
Main limiting factor –
Recommended operating move –
Expected impact –
Why this call –
Trust basis –

–

Portrait of Dr. Edge
Dr. Edge explains this call Why the advisor is making this call
–
Why this call

–

Main limiting factor

–

First operating move

–

Trust basis

–

Portrait of Dr. Edge
Dr. Edge call Dr. Edge

Keeps the first operating move, the reason behind it and the expected gain in one place.

Det här skulle jag ändra först

–

–

Förväntad vinst: –

Vad du kan prova härnäst: –

Machine passport –

–

Setup fingerprint –

–

Dossier 1 Machine fit Load card

–

Passning– Power–% Torque–%
Load card –

–

Power –% Torque –% RPM –% Load card –
Machine passport –

–

Machine passport – Compare – Cycle –s Trust –
Process fit –

–

Setup – Feature – Move – Impact –
Dossier 2 Quality & stability Quality card

–

Quality– Stability– Sensitivity–
Quality risk –

–

Setup sensitivity –

–

Process sensitivity –

–

Feature status –
Pilot reference –
Feature driver –
Setup fingerprint –
Dossier 3 Coolant & chip control Risk card

–

Coolant fit– Depth– Feature–
Coolant fit –

–

Feature / engagement –

–

Chip evacuation –

Depth class – | Cycle model –

Dossier 4 Scenario compare

–

Scenario– Status– Shift–
Scenario compare

–

–

–

Scenario –
Cycle tendency – %
Machine stress – pts
Power tendency – pts
Throughput tendency – %
Cost tendency – %
Risk tendency –
Verdict shift –
  • Compare is currently off.
Dossier 5 Operator handoff

–

Move– Impact– Setup–
Portrait of Dr. Edge
Dr. Edge handoff Dr. Edge

Use this as the first-cut brief for the operator: start point, watch-outs and the first correction lever.

Run this first

  • Nej first-run recipe yet.

If it goes wrong first

  • Nej handoff notes yet.

Bevaka before the first cut

  • Nej active risks from the current advisor checks.
Dossier 6 Technical detail

Use this when you need the exact operating values, the derived cycle view and the machine load numbers behind the call.

Speed– 1/min Feed– mm/min Cycle– s
Spindle speed – 1/min
Feedrate – mm/min
Cycle time – s
Power util. – %
Torque util. – %
Depth class –
Chip evacuation –
Pilot reference –
Cycle model –
MRR – cm³/min
Power – kW
Torque – Nm
Specific force – N/mm²
Dossier 7 Assumptions & limits

–

Konfidens– Model– Sensitivity–

Recommended next checks

  • Nej action suggestions yet.

Derived assumptions

  • Nej derived assumptions were needed.

Advisor notes

  • Nej additional notes.
Download PDF

Download the current inputs and advisor results as a compact PDF report.

Trace Trace panel

Deep diagnostics for normalized inputs, selected references, derived variables and triggered rules.

 
{}
Visible only with ?evdiag=1.

Detta förblir en rådgivare, inte en autopilot. Härledda, seed-baserade och uppskattade utdata märks tydligt så att användaren kan se både rekommendationen och förtroendegrunden bakom den.